No products in the cart.
£12.99 – £16.9930m x 48mm Blue Tape Printing Masking Heat Bed Tape for 3D Printer Accessories (10 Pcs)
SKU: N/AMasking tape is based on the import colorful masked paper.
One single face made of coating rubber pressure sensitive adhesive.
The other face made of anti-stick material.
£195.993D Printer Desktop by WEEDO M2 Metal Frame Structure Fully Enclosed and Assembled Single Extruder with Air Filtration Quiet and Healthy
SKU: N/A【Fully Enclosed】The enclosed design allows the printing process low noise and odour. Great for working next to your desktop 3d printer. Three point adjustments make the leveling process easy and quick even for a beginner
【Air Filtration】Our 3D printer equipped with air filtration module, Filtration fineness up to 0.08um, reduce the harmful gas in the 3d printing process
【Removable Print Bed】WEEDO M2 3d printer with magnetic print bed – So it will be very easy to remove the model or change the masking tape on print surface
£24.793D Printer Kits CNC Shield V3.0 + R3 Board + Nema 17 Stepper Motor + 4PCS A4988 Driver + Stepper Motor Controller Shield Kit with Heat Sink for Quimat Arduino
SKU: N/A3D PRINTER KITS : This 3d printer kits will meet meet most requirements,it includes CNC shielded V3.0, UNO R3 board, Nema 17 stepper motor, A4988 Driver and Heat sink
A4988 DRIVER : Use a detachable A4988 compatible stepper drive with jumpers to set the microstepping for the stepper drive
STEPPER MOTOR : Suitable for Nema 17, enable to maintain 26Ncm (36.8oz.in) torque, 12V / 0.4A and 1.8 degree angle (200 steps / rev)
£199.00ADIMLab 3D Printer Gantry-S Prusa i3 type 32bit Board 24V15A Power 230X230X260 Build Size Power Resume Filament Detector Metal Extruder and 3 Fans for E3D V6 type Hot End
SKU: N/AADIMLab_Gantry-S 3d printer includes: ◆240X240mm hot bed ◆High Adhesion Building Platform ◆32bit main board ◆Filament detector ◆Metal MK8 extruder ◆scraper, tweezers, Plugging needle, screwdrivers and other tools for assembling ◆4G SD card ◆12864 LCD Display ◆All V-Slot Rails ◆Filament holder
Partially Preassembled kits, 30-50 minutes finish assembly, supply videos for every steps on youtubeall All V-Slot Rails and 2040 frame make moving stable and the structure stronger
32bit Mother board with MOS module, Main frequency 72MHZ, Fast running speed, Equipped with: SD card upgrade configuration firmware, configuration file to adjust drive current, Support power Resume, filament detector; Upgrading and Optional : WIFI, Auto leveling
£169.99Anet A6 3D Printer DIY Kit Set with High Precision Self Assembly Big Size Heatbed, 2004 LCD Screen Display, TF Card Off-line Printing Function (220 x 220 x 250mm)
SKU: N/A【Technical Details】:Max Printer Size: 220 * 220 * 250mm, Printer Speed: 10-150mm/s, Nozzle Diameter: 0.4mm, Layer Thickness: 0.1-0.3mm, Printing Accuracy: 0.10mm, XY Axis Accuracy: 0.012mm, Z Axis Accuracy: 0.004mm, Nozzle Temperature: Max 260℃, Hot Bed Temperature: 50-100℃, Recommend ABS Setting: Nozzle: 230℃, Hotbed: 80℃, Recommend PLA Setting: Nozzle: 210 ℃ Hotbed: 50℃.
【STABILITY & RELIABILITY】 Acrylic plate fuselage: Laser percision cutting, good insulation and the frame structure is stable. High quality stepper motor: The motor is upgraded from single head to double head, the transmission is more stable and more synchronous.
【HD LED display:】 2004 LCD display, Insert SD card on sides, offline print; TF card support, LCD screen and keyboard for easy offline use
£239.97 – £399.99Anet A8 High Precision Desktop 3D Printer Kits Support ABS/PLA/HIP/PP/Wood Filament 1.75mm
SKU: N/A2004 LCD screen, English interface, 5 keys for easy operation, support SD card and off-line printing.
Customized MK8 nozzle with sophisticated technology to produce smooth filaments fluently.
Updated sophisticated V2.0 version mainboard, supporting multi-function, higher accuracy. Superior power supply system for safely using, 240W, 110V/220V.
£25.99ANYCUBIC 3D Printer I3 MEGA Upgrade Components
SKU: N/APLEASE NOTE!! ONLY SUITABLE for ANYCUBIC I3 MEGA
Package Includes: 1pcs High Quality Extrude; 1pcs Suspended Filament Rack
High Quality Extrude: support print materials: TPU, PLA, ABS, HIPS, WOOD, provides better printing experience of flexible filament
ANYCUBIC 3D Printer Photon UV Photocuring Ultra Precision 2560×1440 2K HD Masking LCD Printer with Smart Touch Color Screen Off-line Print and UK Plug (Basic Accessories)
SKU: N/A【Super Easy to Use and Set Up】 Unlike some DIY 3D printers, this Anycubic Photon is almost ready to work out of box. We have adequate instructions for set up, leveling and cleaning, etc. It also comes with all you need accessories and tools, includes resin to help you get started hassle-free
【Extreme Precision and Detail】 Using a 2560×1440 2K HD masking LCD, the Anycubic Photon has XY resolution of 47 microns and Z layer height down to 10 microns, means that it can deliver 3D printed models with amazing detail. The layers are so fine they can’t be noticed by the naked eye, which could not be imagined by traditional FDM 3D printers
【Standalone Metal Body, High Quality CNC Parts】 The compact standalone full metal body brings super rigidity. Metal and CNC-made structure offers repeatable and consistent performance in long run. The Anycubic Photon sets the entry level LCD 3D printer with extreme precision and quality
£439.99ANYCUBIC 3D Printer, Photon S UV LCD Printer Photocuring Ultra Precision, Masking Technology 2K Screen Matrix 405nm UV Light Z-axis Dual Linear Rail Printing with Air Filtering System
SKU: N/A【Slicing Software】 Photon S Slicing Software. Gives you extraordinary user experience. Photon S Slicing Software takes only 1 minute to slice 30Mb .stl model files while the open-sourced slicing software would take up to 10minutes
【Ultra Precision Technology】 Build volume: 115mm(L) X 65mm(W) X 165mm(H). Adopt matrix UV lighting and 2560*1440 high resolution screen, uniform distribution of energy, both contribute to enhance prototype precision, Z axis accuracy: 0.00125mm
【Z-axis Dual Linear Rail】 Improve the stability of Z axis, contribute to smooth surface and reconstruct more detail; New aluminum platform with wire drawing process design, enhance adhesion make it more stable during printing
£318.49ANYCUBIC 4Max Pro 3D Printer Printing Size 270x205x205mm³ with UltraBase Heated Build Plate UK Plug, Fully Assembled + Free 1kg Filament, Works with PLA/ABS
SKU: N/A【Quick Start】Printing Size: 270*205*205mm³, bigger volume for your creativity. Fully assembled, no hassle of installation
【High Quality Extruder】 Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print Materials: PLA, ABS, HIPS, WOOD etc
【Enclosed and Quiet Printing Space】 ①Maintain the environment under constant temperature, reduce the heat loss; ②Specific enclosed design, for children’s homeschooling; ③Quiet printing: barely hear the printing noise and no noise annoy on work and rest
£469.99ANYCUBIC Chiron 3D Printer Assisted Auto Leveling Single Extruder Large Print Size 400x400x450mm UK Plug + Free 1kg PLA Filament, Work with with PLA, TPU, ABS, HIPS, WOOD
SKU: N/A【Bigger Than Big】 Prints to a max size of 400x400x450mm giving you the freedom to think and print big. Rigid metal frame can reduce the body shake during printing and improve the printing quality
【More Filament Choices】 Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print Materials: TPU, PLA, ABS, HIPS, WOOD etc
【Quick Start】 ①Assisted Matrix Automatic Leveling: Automatically detect 25 points, supports real-time adjustment, Real-time compensation of nozzle height ②Modular design with quick assembly lets you start printing straight away
£237.70ANYCUBIC MEGA ZERO FDM 3D Printer with Printing Size 220 x 220 x 250mm Y-axis Dual Screw Rod Powerful Extruder Support PLA, TPU, WOOD, PETG
SKU: N/A【Fast Assembly】 Large Build Volume: 210 x 210 x 205mm. Modular design with quick assembly lets you start printing straight away
【Stability】 Rigid metal frame can reduce the body shake during printing and improve the printing quality
【ANYCUBIC Ultrabase】 Excellent adhesion, easy removal and durable. Ultrabase covered by microporous coating, shows strong adhesion in printing, super flatness, fast and uniform heating
£349.99ANYCUBIC MEGA-S 3D Printer Printing Size 210 x 210 x 205mm With UltraBase Heated Build Plate UK Plug, 3.5″ Touch Screen, Works with TPU/PLA/ABS
SKU: N/A【Quick Start】 Printing Size: 210 x 210 x 205mm; Modular design with quick assembly lets you start printing straight away; Rigid metal frame can reduce the body shake during printing and improve the printing quality
【High Quality Extruder】 Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print Materials: TPU, PLA, ABS, HIPS, WOOD etc
【Suspended Filament Rack】 One-piece hanging design, simple and beautiful, the feeding of filament is smoother and the storage of filament is more convenient
£429.99ANYCUBIC Predator Delta Kossel 3D Printer Pre-assembled with Ultrabase hotbed and Assisted Leveling Large Print Size 370×370×455mm UK Plug + Free 1kg Filament, Works with PLA, TPU, ABS, HIPS, Wood
SKU: N/A【Huge Build Volume and Stability】 Prints to a max size of φ370mm(D) x 455mm(H) giving you the freedom to think and print big. Rigid metal frame can reduce the body shake during printing and improve the printing quality
【Quick Start】 ①Assisted Matrix Automatic Leveling: Automatically detect 37 points, supports real-time adjustment, Real-time compensation of nozzle height ②Modular design with quick assembly lets you start printing straight away
【A Novel 3D Printer Platform – ANYCUBIC Ultrabase】 Excellent adhesion, easy removal and durable. Ultrabase covered by microporous coating, shows strong adhesion in printing, super flatness, fast and uniform heating
£44.95BLtouch auto bed level sensor for creality ender 3 3D printer
SKU: N/Afor creality V1 mainboard
for Ender-3 / Ender-3s / Ender-3 Pro/CR-10 3D Printer
full kit includes all brackets and cables
£119.95Canon PIXMA MG 5750 All-in-One Wi-Fi Printer
SKU: N/AEasily connect, print, scan and copy at home using this affordable, high quality 5-ink All-In-One
Quickly and effortlessly print and scan from smart devices with the Canon PRINT app and Wi-Fi Direct
Experience the creative freedom of cloud printing and scanning with enhanced PIXMA Cloud Link
£91.64Canon SELPHY CP1000 Photo Printer, White
SKU: N/AStylish, ultra-compact photo printer for instant prints anywhere
Enjoy great flexibility with direct printing from cameras, memory cards or USB sticks
See the quality of dye sublimation for vibrant, durable lab-quality photos in less than one minute
£279.00Comgrow Creality 3D Ender-3 Pro 3D-Drucker mit Magnetischem Heißem Bettaufkleber & UL-zertifiziertes Netzteil
SKU: N/AUpgrade Version: This is the upgrade version of Reality Ender-3 3D printer with Resume Printing, 220*220*250mm printing size
C-magnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling
Safe Power Supply: Ender 3 Pro comes with a Mean Well UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes
£426.45CREALITY 3D CR-10S Pro 3D printer by Technology Outlet
SKU: N/Aauto bed levelling
power off resume
low filament detect
£299.00Creality 3D Ender 5 3D Printer with Resume Printing Function and Brand Power Supply
SKU: N/AHigh-Precision Printing Quality: Equipped with dual Y axis motors and down-shift Z axis, moving more smoothly, fewer points of failure and fewer headaches.
Brand Power Supply: Built-in brand power supply, heat up the hot bed to 110℃ in 5 minutes.
Resume Printing Function: The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
30m x 48mm Blue Tape Printing Masking Heat Bed Tape for 3D Printer Accessories (10 Pcs)
Masking tape is based on the import colorful masked paper.
One single face made of coating rubber pressure sensitive adhesive.
The other face made of anti-stick material.
3D Printer Desktop by WEEDO M2 Metal Frame Structure Fully Enclosed and Assembled Single Extruder with Air Filtration Quiet and Healthy
【Fully Enclosed】The enclosed design allows the printing process low noise and odour. Great for working next to your desktop 3d printer. Three point adjustments make the leveling process easy and quick even for a beginner
【Air Filtration】Our 3D printer equipped with air filtration module, Filtration fineness up to 0.08um, reduce the harmful gas in the 3d printing process
【Removable Print Bed】WEEDO M2 3d printer with magnetic print bed – So it will be very easy to remove the model or change the masking tape on print surface
3D Printer Kits CNC Shield V3.0 + R3 Board + Nema 17 Stepper Motor + 4PCS A4988 Driver + Stepper Motor Controller Shield Kit with Heat Sink for Quimat Arduino
3D PRINTER KITS : This 3d printer kits will meet meet most requirements,it includes CNC shielded V3.0, UNO R3 board, Nema 17 stepper motor, A4988 Driver and Heat sink
A4988 DRIVER : Use a detachable A4988 compatible stepper drive with jumpers to set the microstepping for the stepper drive
STEPPER MOTOR : Suitable for Nema 17, enable to maintain 26Ncm (36.8oz.in) torque, 12V / 0.4A and 1.8 degree angle (200 steps / rev)
ADIMLab 3D Printer Gantry-S Prusa i3 type 32bit Board 24V15A Power 230X230X260 Build Size Power Resume Filament Detector Metal Extruder and 3 Fans for E3D V6 type Hot End
ADIMLab_Gantry-S 3d printer includes: ◆240X240mm hot bed ◆High Adhesion Building Platform ◆32bit main board ◆Filament detector ◆Metal MK8 extruder ◆scraper, tweezers, Plugging needle, screwdrivers and other tools for assembling ◆4G SD card ◆12864 LCD Display ◆All V-Slot Rails ◆Filament holder
Partially Preassembled kits, 30-50 minutes finish assembly, supply videos for every steps on youtubeall All V-Slot Rails and 2040 frame make moving stable and the structure stronger
32bit Mother board with MOS module, Main frequency 72MHZ, Fast running speed, Equipped with: SD card upgrade configuration firmware, configuration file to adjust drive current, Support power Resume, filament detector; Upgrading and Optional : WIFI, Auto leveling
Anet A6 3D Printer DIY Kit Set with High Precision Self Assembly Big Size Heatbed, 2004 LCD Screen Display, TF Card Off-line Printing Function (220 x 220 x 250mm)
【Technical Details】:Max Printer Size: 220 * 220 * 250mm, Printer Speed: 10-150mm/s, Nozzle Diameter: 0.4mm, Layer Thickness: 0.1-0.3mm, Printing Accuracy: 0.10mm, XY Axis Accuracy: 0.012mm, Z Axis Accuracy: 0.004mm, Nozzle Temperature: Max 260℃, Hot Bed Temperature: 50-100℃, Recommend ABS Setting: Nozzle: 230℃, Hotbed: 80℃, Recommend PLA Setting: Nozzle: 210 ℃ Hotbed: 50℃.
【STABILITY & RELIABILITY】 Acrylic plate fuselage: Laser percision cutting, good insulation and the frame structure is stable. High quality stepper motor: The motor is upgraded from single head to double head, the transmission is more stable and more synchronous.
【HD LED display:】 2004 LCD display, Insert SD card on sides, offline print; TF card support, LCD screen and keyboard for easy offline use
Anet A8 High Precision Desktop 3D Printer Kits Support ABS/PLA/HIP/PP/Wood Filament 1.75mm
2004 LCD screen, English interface, 5 keys for easy operation, support SD card and off-line printing.
Customized MK8 nozzle with sophisticated technology to produce smooth filaments fluently.
Updated sophisticated V2.0 version mainboard, supporting multi-function, higher accuracy. Superior power supply system for safely using, 240W, 110V/220V.
ANYCUBIC 3D Printer I3 MEGA Upgrade Components
PLEASE NOTE!! ONLY SUITABLE for ANYCUBIC I3 MEGA
Package Includes: 1pcs High Quality Extrude; 1pcs Suspended Filament Rack
High Quality Extrude: support print materials: TPU, PLA, ABS, HIPS, WOOD, provides better printing experience of flexible filament
ANYCUBIC 3D Printer Photon UV Photocuring Ultra Precision 2560×1440 2K HD Masking LCD Printer with Smart Touch Color Screen Off-line Print and UK Plug (Basic Accessories)
【Super Easy to Use and Set Up】 Unlike some DIY 3D printers, this Anycubic Photon is almost ready to work out of box. We have adequate instructions for set up, leveling and cleaning, etc. It also comes with all you need accessories and tools, includes resin to help you get started hassle-free
【Extreme Precision and Detail】 Using a 2560×1440 2K HD masking LCD, the Anycubic Photon has XY resolution of 47 microns and Z layer height down to 10 microns, means that it can deliver 3D printed models with amazing detail. The layers are so fine they can’t be noticed by the naked eye, which could not be imagined by traditional FDM 3D printers
【Standalone Metal Body, High Quality CNC Parts】 The compact standalone full metal body brings super rigidity. Metal and CNC-made structure offers repeatable and consistent performance in long run. The Anycubic Photon sets the entry level LCD 3D printer with extreme precision and quality
ANYCUBIC 3D Printer, Photon S UV LCD Printer Photocuring Ultra Precision, Masking Technology 2K Screen Matrix 405nm UV Light Z-axis Dual Linear Rail Printing with Air Filtering System
【Slicing Software】 Photon S Slicing Software. Gives you extraordinary user experience. Photon S Slicing Software takes only 1 minute to slice 30Mb .stl model files while the open-sourced slicing software would take up to 10minutes
【Ultra Precision Technology】 Build volume: 115mm(L) X 65mm(W) X 165mm(H). Adopt matrix UV lighting and 2560*1440 high resolution screen, uniform distribution of energy, both contribute to enhance prototype precision, Z axis accuracy: 0.00125mm
【Z-axis Dual Linear Rail】 Improve the stability of Z axis, contribute to smooth surface and reconstruct more detail; New aluminum platform with wire drawing process design, enhance adhesion make it more stable during printing
ANYCUBIC 4Max Pro 3D Printer Printing Size 270x205x205mm³ with UltraBase Heated Build Plate UK Plug, Fully Assembled + Free 1kg Filament, Works with PLA/ABS
【Quick Start】Printing Size: 270*205*205mm³, bigger volume for your creativity. Fully assembled, no hassle of installation
【High Quality Extruder】 Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print Materials: PLA, ABS, HIPS, WOOD etc
【Enclosed and Quiet Printing Space】 ①Maintain the environment under constant temperature, reduce the heat loss; ②Specific enclosed design, for children’s homeschooling; ③Quiet printing: barely hear the printing noise and no noise annoy on work and rest
ANYCUBIC Chiron 3D Printer Assisted Auto Leveling Single Extruder Large Print Size 400x400x450mm UK Plug + Free 1kg PLA Filament, Work with with PLA, TPU, ABS, HIPS, WOOD
【Bigger Than Big】 Prints to a max size of 400x400x450mm giving you the freedom to think and print big. Rigid metal frame can reduce the body shake during printing and improve the printing quality
【More Filament Choices】 Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print Materials: TPU, PLA, ABS, HIPS, WOOD etc
【Quick Start】 ①Assisted Matrix Automatic Leveling: Automatically detect 25 points, supports real-time adjustment, Real-time compensation of nozzle height ②Modular design with quick assembly lets you start printing straight away
ANYCUBIC MEGA ZERO FDM 3D Printer with Printing Size 220 x 220 x 250mm Y-axis Dual Screw Rod Powerful Extruder Support PLA, TPU, WOOD, PETG
【Fast Assembly】 Large Build Volume: 210 x 210 x 205mm. Modular design with quick assembly lets you start printing straight away
【Stability】 Rigid metal frame can reduce the body shake during printing and improve the printing quality
【ANYCUBIC Ultrabase】 Excellent adhesion, easy removal and durable. Ultrabase covered by microporous coating, shows strong adhesion in printing, super flatness, fast and uniform heating
ANYCUBIC MEGA-S 3D Printer Printing Size 210 x 210 x 205mm With UltraBase Heated Build Plate UK Plug, 3.5″ Touch Screen, Works with TPU/PLA/ABS
【Quick Start】 Printing Size: 210 x 210 x 205mm; Modular design with quick assembly lets you start printing straight away; Rigid metal frame can reduce the body shake during printing and improve the printing quality
【High Quality Extruder】 Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print Materials: TPU, PLA, ABS, HIPS, WOOD etc
【Suspended Filament Rack】 One-piece hanging design, simple and beautiful, the feeding of filament is smoother and the storage of filament is more convenient
ANYCUBIC Predator Delta Kossel 3D Printer Pre-assembled with Ultrabase hotbed and Assisted Leveling Large Print Size 370×370×455mm UK Plug + Free 1kg Filament, Works with PLA, TPU, ABS, HIPS, Wood
【Huge Build Volume and Stability】 Prints to a max size of φ370mm(D) x 455mm(H) giving you the freedom to think and print big. Rigid metal frame can reduce the body shake during printing and improve the printing quality
【Quick Start】 ①Assisted Matrix Automatic Leveling: Automatically detect 37 points, supports real-time adjustment, Real-time compensation of nozzle height ②Modular design with quick assembly lets you start printing straight away
【A Novel 3D Printer Platform – ANYCUBIC Ultrabase】 Excellent adhesion, easy removal and durable. Ultrabase covered by microporous coating, shows strong adhesion in printing, super flatness, fast and uniform heating
BLtouch auto bed level sensor for creality ender 3 3D printer
for creality V1 mainboard
for Ender-3 / Ender-3s / Ender-3 Pro/CR-10 3D Printer
full kit includes all brackets and cables
Canon PIXMA MG 5750 All-in-One Wi-Fi Printer
Easily connect, print, scan and copy at home using this affordable, high quality 5-ink All-In-One
Quickly and effortlessly print and scan from smart devices with the Canon PRINT app and Wi-Fi Direct
Experience the creative freedom of cloud printing and scanning with enhanced PIXMA Cloud Link
Canon SELPHY CP1000 Photo Printer, White
Stylish, ultra-compact photo printer for instant prints anywhere
Enjoy great flexibility with direct printing from cameras, memory cards or USB sticks
See the quality of dye sublimation for vibrant, durable lab-quality photos in less than one minute
Comgrow Creality 3D Ender-3 Pro 3D-Drucker mit Magnetischem Heißem Bettaufkleber & UL-zertifiziertes Netzteil
Upgrade Version: This is the upgrade version of Reality Ender-3 3D printer with Resume Printing, 220*220*250mm printing size
C-magnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling
Safe Power Supply: Ender 3 Pro comes with a Mean Well UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes
CREALITY 3D CR-10S Pro 3D printer by Technology Outlet
auto bed levelling
power off resume
low filament detect
Creality 3D Ender 5 3D Printer with Resume Printing Function and Brand Power Supply
High-Precision Printing Quality: Equipped with dual Y axis motors and down-shift Z axis, moving more smoothly, fewer points of failure and fewer headaches.
Brand Power Supply: Built-in brand power supply, heat up the hot bed to 110℃ in 5 minutes.
Resume Printing Function: The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
30m x 48mm Blue Tape Printing Masking Heat Bed Tape for 3D Printer Accessories (10 Pcs)
Masking tape is based on the import colorful masked paper.
One single face made of coating rubber pressure sensitive adhesive.
The other face made of anti-stick material.
3D Printer Desktop by WEEDO M2 Metal Frame Structure Fully Enclosed and Assembled Single Extruder with Air Filtration Quiet and Healthy
【Fully Enclosed】The enclosed design allows the printing process low noise and odour. Great for working next to your desktop 3d printer. Three point adjustments make the leveling process easy and quick even for a beginner
【Air Filtration】Our 3D printer equipped with air filtration module, Filtration fineness up to 0.08um, reduce the harmful gas in the 3d printing process
【Removable Print Bed】WEEDO M2 3d printer with magnetic print bed – So it will be very easy to remove the model or change the masking tape on print surface
3D Printer Kits CNC Shield V3.0 + R3 Board + Nema 17 Stepper Motor + 4PCS A4988 Driver + Stepper Motor Controller Shield Kit with Heat Sink for Quimat Arduino
3D PRINTER KITS : This 3d printer kits will meet meet most requirements,it includes CNC shielded V3.0, UNO R3 board, Nema 17 stepper motor, A4988 Driver and Heat sink
A4988 DRIVER : Use a detachable A4988 compatible stepper drive with jumpers to set the microstepping for the stepper drive
STEPPER MOTOR : Suitable for Nema 17, enable to maintain 26Ncm (36.8oz.in) torque, 12V / 0.4A and 1.8 degree angle (200 steps / rev)
ADIMLab 3D Printer Gantry-S Prusa i3 type 32bit Board 24V15A Power 230X230X260 Build Size Power Resume Filament Detector Metal Extruder and 3 Fans for E3D V6 type Hot End
ADIMLab_Gantry-S 3d printer includes: ◆240X240mm hot bed ◆High Adhesion Building Platform ◆32bit main board ◆Filament detector ◆Metal MK8 extruder ◆scraper, tweezers, Plugging needle, screwdrivers and other tools for assembling ◆4G SD card ◆12864 LCD Display ◆All V-Slot Rails ◆Filament holder
Partially Preassembled kits, 30-50 minutes finish assembly, supply videos for every steps on youtubeall All V-Slot Rails and 2040 frame make moving stable and the structure stronger
32bit Mother board with MOS module, Main frequency 72MHZ, Fast running speed, Equipped with: SD card upgrade configuration firmware, configuration file to adjust drive current, Support power Resume, filament detector; Upgrading and Optional : WIFI, Auto leveling
Anet A6 3D Printer DIY Kit Set with High Precision Self Assembly Big Size Heatbed, 2004 LCD Screen Display, TF Card Off-line Printing Function (220 x 220 x 250mm)
【Technical Details】:Max Printer Size: 220 * 220 * 250mm, Printer Speed: 10-150mm/s, Nozzle Diameter: 0.4mm, Layer Thickness: 0.1-0.3mm, Printing Accuracy: 0.10mm, XY Axis Accuracy: 0.012mm, Z Axis Accuracy: 0.004mm, Nozzle Temperature: Max 260℃, Hot Bed Temperature: 50-100℃, Recommend ABS Setting: Nozzle: 230℃, Hotbed: 80℃, Recommend PLA Setting: Nozzle: 210 ℃ Hotbed: 50℃.
【STABILITY & RELIABILITY】 Acrylic plate fuselage: Laser percision cutting, good insulation and the frame structure is stable. High quality stepper motor: The motor is upgraded from single head to double head, the transmission is more stable and more synchronous.
【HD LED display:】 2004 LCD display, Insert SD card on sides, offline print; TF card support, LCD screen and keyboard for easy offline use
Anet A8 High Precision Desktop 3D Printer Kits Support ABS/PLA/HIP/PP/Wood Filament 1.75mm
2004 LCD screen, English interface, 5 keys for easy operation, support SD card and off-line printing.
Customized MK8 nozzle with sophisticated technology to produce smooth filaments fluently.
Updated sophisticated V2.0 version mainboard, supporting multi-function, higher accuracy. Superior power supply system for safely using, 240W, 110V/220V.
ANYCUBIC 3D Printer I3 MEGA Upgrade Components
PLEASE NOTE!! ONLY SUITABLE for ANYCUBIC I3 MEGA
Package Includes: 1pcs High Quality Extrude; 1pcs Suspended Filament Rack
High Quality Extrude: support print materials: TPU, PLA, ABS, HIPS, WOOD, provides better printing experience of flexible filament
ANYCUBIC 3D Printer Photon UV Photocuring Ultra Precision 2560×1440 2K HD Masking LCD Printer with Smart Touch Color Screen Off-line Print and UK Plug (Basic Accessories)
【Super Easy to Use and Set Up】 Unlike some DIY 3D printers, this Anycubic Photon is almost ready to work out of box. We have adequate instructions for set up, leveling and cleaning, etc. It also comes with all you need accessories and tools, includes resin to help you get started hassle-free
【Extreme Precision and Detail】 Using a 2560×1440 2K HD masking LCD, the Anycubic Photon has XY resolution of 47 microns and Z layer height down to 10 microns, means that it can deliver 3D printed models with amazing detail. The layers are so fine they can’t be noticed by the naked eye, which could not be imagined by traditional FDM 3D printers
【Standalone Metal Body, High Quality CNC Parts】 The compact standalone full metal body brings super rigidity. Metal and CNC-made structure offers repeatable and consistent performance in long run. The Anycubic Photon sets the entry level LCD 3D printer with extreme precision and quality
ANYCUBIC 3D Printer, Photon S UV LCD Printer Photocuring Ultra Precision, Masking Technology 2K Screen Matrix 405nm UV Light Z-axis Dual Linear Rail Printing with Air Filtering System
【Slicing Software】 Photon S Slicing Software. Gives you extraordinary user experience. Photon S Slicing Software takes only 1 minute to slice 30Mb .stl model files while the open-sourced slicing software would take up to 10minutes
【Ultra Precision Technology】 Build volume: 115mm(L) X 65mm(W) X 165mm(H). Adopt matrix UV lighting and 2560*1440 high resolution screen, uniform distribution of energy, both contribute to enhance prototype precision, Z axis accuracy: 0.00125mm
【Z-axis Dual Linear Rail】 Improve the stability of Z axis, contribute to smooth surface and reconstruct more detail; New aluminum platform with wire drawing process design, enhance adhesion make it more stable during printing
ANYCUBIC 4Max Pro 3D Printer Printing Size 270x205x205mm³ with UltraBase Heated Build Plate UK Plug, Fully Assembled + Free 1kg Filament, Works with PLA/ABS
【Quick Start】Printing Size: 270*205*205mm³, bigger volume for your creativity. Fully assembled, no hassle of installation
【High Quality Extruder】 Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print Materials: PLA, ABS, HIPS, WOOD etc
【Enclosed and Quiet Printing Space】 ①Maintain the environment under constant temperature, reduce the heat loss; ②Specific enclosed design, for children’s homeschooling; ③Quiet printing: barely hear the printing noise and no noise annoy on work and rest
ANYCUBIC Chiron 3D Printer Assisted Auto Leveling Single Extruder Large Print Size 400x400x450mm UK Plug + Free 1kg PLA Filament, Work with with PLA, TPU, ABS, HIPS, WOOD
【Bigger Than Big】 Prints to a max size of 400x400x450mm giving you the freedom to think and print big. Rigid metal frame can reduce the body shake during printing and improve the printing quality
【More Filament Choices】 Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print Materials: TPU, PLA, ABS, HIPS, WOOD etc
【Quick Start】 ①Assisted Matrix Automatic Leveling: Automatically detect 25 points, supports real-time adjustment, Real-time compensation of nozzle height ②Modular design with quick assembly lets you start printing straight away
ANYCUBIC MEGA ZERO FDM 3D Printer with Printing Size 220 x 220 x 250mm Y-axis Dual Screw Rod Powerful Extruder Support PLA, TPU, WOOD, PETG
【Fast Assembly】 Large Build Volume: 210 x 210 x 205mm. Modular design with quick assembly lets you start printing straight away
【Stability】 Rigid metal frame can reduce the body shake during printing and improve the printing quality
【ANYCUBIC Ultrabase】 Excellent adhesion, easy removal and durable. Ultrabase covered by microporous coating, shows strong adhesion in printing, super flatness, fast and uniform heating
ANYCUBIC MEGA-S 3D Printer Printing Size 210 x 210 x 205mm With UltraBase Heated Build Plate UK Plug, 3.5″ Touch Screen, Works with TPU/PLA/ABS
【Quick Start】 Printing Size: 210 x 210 x 205mm; Modular design with quick assembly lets you start printing straight away; Rigid metal frame can reduce the body shake during printing and improve the printing quality
【High Quality Extruder】 Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print Materials: TPU, PLA, ABS, HIPS, WOOD etc
【Suspended Filament Rack】 One-piece hanging design, simple and beautiful, the feeding of filament is smoother and the storage of filament is more convenient
ANYCUBIC Predator Delta Kossel 3D Printer Pre-assembled with Ultrabase hotbed and Assisted Leveling Large Print Size 370×370×455mm UK Plug + Free 1kg Filament, Works with PLA, TPU, ABS, HIPS, Wood
【Huge Build Volume and Stability】 Prints to a max size of φ370mm(D) x 455mm(H) giving you the freedom to think and print big. Rigid metal frame can reduce the body shake during printing and improve the printing quality
【Quick Start】 ①Assisted Matrix Automatic Leveling: Automatically detect 37 points, supports real-time adjustment, Real-time compensation of nozzle height ②Modular design with quick assembly lets you start printing straight away
【A Novel 3D Printer Platform – ANYCUBIC Ultrabase】 Excellent adhesion, easy removal and durable. Ultrabase covered by microporous coating, shows strong adhesion in printing, super flatness, fast and uniform heating
BLtouch auto bed level sensor for creality ender 3 3D printer
for creality V1 mainboard
for Ender-3 / Ender-3s / Ender-3 Pro/CR-10 3D Printer
full kit includes all brackets and cables
Canon PIXMA MG 5750 All-in-One Wi-Fi Printer
Easily connect, print, scan and copy at home using this affordable, high quality 5-ink All-In-One
Quickly and effortlessly print and scan from smart devices with the Canon PRINT app and Wi-Fi Direct
Experience the creative freedom of cloud printing and scanning with enhanced PIXMA Cloud Link
Canon SELPHY CP1000 Photo Printer, White
Stylish, ultra-compact photo printer for instant prints anywhere
Enjoy great flexibility with direct printing from cameras, memory cards or USB sticks
See the quality of dye sublimation for vibrant, durable lab-quality photos in less than one minute
Comgrow Creality 3D Ender-3 Pro 3D-Drucker mit Magnetischem Heißem Bettaufkleber & UL-zertifiziertes Netzteil
Upgrade Version: This is the upgrade version of Reality Ender-3 3D printer with Resume Printing, 220*220*250mm printing size
C-magnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling
Safe Power Supply: Ender 3 Pro comes with a Mean Well UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes
CREALITY 3D CR-10S Pro 3D printer by Technology Outlet
auto bed levelling
power off resume
low filament detect
Creality 3D Ender 5 3D Printer with Resume Printing Function and Brand Power Supply
High-Precision Printing Quality: Equipped with dual Y axis motors and down-shift Z axis, moving more smoothly, fewer points of failure and fewer headaches.
Brand Power Supply: Built-in brand power supply, heat up the hot bed to 110℃ in 5 minutes.
Resume Printing Function: The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
30m x 48mm Blue Tape Printing Masking Heat Bed Tape for 3D Printer Accessories (10 Pcs)
Masking tape is based on the import colorful masked paper.
One single face made of coating rubber pressure sensitive adhesive.
The other face made of anti-stick material.
3D Printer Desktop by WEEDO M2 Metal Frame Structure Fully Enclosed and Assembled Single Extruder with Air Filtration Quiet and Healthy
【Fully Enclosed】The enclosed design allows the printing process low noise and odour. Great for working next to your desktop 3d printer. Three point adjustments make the leveling process easy and quick even for a beginner
【Air Filtration】Our 3D printer equipped with air filtration module, Filtration fineness up to 0.08um, reduce the harmful gas in the 3d printing process
【Removable Print Bed】WEEDO M2 3d printer with magnetic print bed – So it will be very easy to remove the model or change the masking tape on print surface
3D Printer Kits CNC Shield V3.0 + R3 Board + Nema 17 Stepper Motor + 4PCS A4988 Driver + Stepper Motor Controller Shield Kit with Heat Sink for Quimat Arduino
3D PRINTER KITS : This 3d printer kits will meet meet most requirements,it includes CNC shielded V3.0, UNO R3 board, Nema 17 stepper motor, A4988 Driver and Heat sink
A4988 DRIVER : Use a detachable A4988 compatible stepper drive with jumpers to set the microstepping for the stepper drive
STEPPER MOTOR : Suitable for Nema 17, enable to maintain 26Ncm (36.8oz.in) torque, 12V / 0.4A and 1.8 degree angle (200 steps / rev)
ADIMLab 3D Printer Gantry-S Prusa i3 type 32bit Board 24V15A Power 230X230X260 Build Size Power Resume Filament Detector Metal Extruder and 3 Fans for E3D V6 type Hot End
ADIMLab_Gantry-S 3d printer includes: ◆240X240mm hot bed ◆High Adhesion Building Platform ◆32bit main board ◆Filament detector ◆Metal MK8 extruder ◆scraper, tweezers, Plugging needle, screwdrivers and other tools for assembling ◆4G SD card ◆12864 LCD Display ◆All V-Slot Rails ◆Filament holder
Partially Preassembled kits, 30-50 minutes finish assembly, supply videos for every steps on youtubeall All V-Slot Rails and 2040 frame make moving stable and the structure stronger
32bit Mother board with MOS module, Main frequency 72MHZ, Fast running speed, Equipped with: SD card upgrade configuration firmware, configuration file to adjust drive current, Support power Resume, filament detector; Upgrading and Optional : WIFI, Auto leveling
Anet A6 3D Printer DIY Kit Set with High Precision Self Assembly Big Size Heatbed, 2004 LCD Screen Display, TF Card Off-line Printing Function (220 x 220 x 250mm)
【Technical Details】:Max Printer Size: 220 * 220 * 250mm, Printer Speed: 10-150mm/s, Nozzle Diameter: 0.4mm, Layer Thickness: 0.1-0.3mm, Printing Accuracy: 0.10mm, XY Axis Accuracy: 0.012mm, Z Axis Accuracy: 0.004mm, Nozzle Temperature: Max 260℃, Hot Bed Temperature: 50-100℃, Recommend ABS Setting: Nozzle: 230℃, Hotbed: 80℃, Recommend PLA Setting: Nozzle: 210 ℃ Hotbed: 50℃.
【STABILITY & RELIABILITY】 Acrylic plate fuselage: Laser percision cutting, good insulation and the frame structure is stable. High quality stepper motor: The motor is upgraded from single head to double head, the transmission is more stable and more synchronous.
【HD LED display:】 2004 LCD display, Insert SD card on sides, offline print; TF card support, LCD screen and keyboard for easy offline use
Anet A8 High Precision Desktop 3D Printer Kits Support ABS/PLA/HIP/PP/Wood Filament 1.75mm
2004 LCD screen, English interface, 5 keys for easy operation, support SD card and off-line printing.
Customized MK8 nozzle with sophisticated technology to produce smooth filaments fluently.
Updated sophisticated V2.0 version mainboard, supporting multi-function, higher accuracy. Superior power supply system for safely using, 240W, 110V/220V.
ANYCUBIC 3D Printer I3 MEGA Upgrade Components
PLEASE NOTE!! ONLY SUITABLE for ANYCUBIC I3 MEGA
Package Includes: 1pcs High Quality Extrude; 1pcs Suspended Filament Rack
High Quality Extrude: support print materials: TPU, PLA, ABS, HIPS, WOOD, provides better printing experience of flexible filament
ANYCUBIC 3D Printer Photon UV Photocuring Ultra Precision 2560×1440 2K HD Masking LCD Printer with Smart Touch Color Screen Off-line Print and UK Plug (Basic Accessories)
【Super Easy to Use and Set Up】 Unlike some DIY 3D printers, this Anycubic Photon is almost ready to work out of box. We have adequate instructions for set up, leveling and cleaning, etc. It also comes with all you need accessories and tools, includes resin to help you get started hassle-free
【Extreme Precision and Detail】 Using a 2560×1440 2K HD masking LCD, the Anycubic Photon has XY resolution of 47 microns and Z layer height down to 10 microns, means that it can deliver 3D printed models with amazing detail. The layers are so fine they can’t be noticed by the naked eye, which could not be imagined by traditional FDM 3D printers
【Standalone Metal Body, High Quality CNC Parts】 The compact standalone full metal body brings super rigidity. Metal and CNC-made structure offers repeatable and consistent performance in long run. The Anycubic Photon sets the entry level LCD 3D printer with extreme precision and quality
ANYCUBIC 3D Printer, Photon S UV LCD Printer Photocuring Ultra Precision, Masking Technology 2K Screen Matrix 405nm UV Light Z-axis Dual Linear Rail Printing with Air Filtering System
【Slicing Software】 Photon S Slicing Software. Gives you extraordinary user experience. Photon S Slicing Software takes only 1 minute to slice 30Mb .stl model files while the open-sourced slicing software would take up to 10minutes
【Ultra Precision Technology】 Build volume: 115mm(L) X 65mm(W) X 165mm(H). Adopt matrix UV lighting and 2560*1440 high resolution screen, uniform distribution of energy, both contribute to enhance prototype precision, Z axis accuracy: 0.00125mm
【Z-axis Dual Linear Rail】 Improve the stability of Z axis, contribute to smooth surface and reconstruct more detail; New aluminum platform with wire drawing process design, enhance adhesion make it more stable during printing
ANYCUBIC 4Max Pro 3D Printer Printing Size 270x205x205mm³ with UltraBase Heated Build Plate UK Plug, Fully Assembled + Free 1kg Filament, Works with PLA/ABS
【Quick Start】Printing Size: 270*205*205mm³, bigger volume for your creativity. Fully assembled, no hassle of installation
【High Quality Extruder】 Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print Materials: PLA, ABS, HIPS, WOOD etc
【Enclosed and Quiet Printing Space】 ①Maintain the environment under constant temperature, reduce the heat loss; ②Specific enclosed design, for children’s homeschooling; ③Quiet printing: barely hear the printing noise and no noise annoy on work and rest
ANYCUBIC Chiron 3D Printer Assisted Auto Leveling Single Extruder Large Print Size 400x400x450mm UK Plug + Free 1kg PLA Filament, Work with with PLA, TPU, ABS, HIPS, WOOD
【Bigger Than Big】 Prints to a max size of 400x400x450mm giving you the freedom to think and print big. Rigid metal frame can reduce the body shake during printing and improve the printing quality
【More Filament Choices】 Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print Materials: TPU, PLA, ABS, HIPS, WOOD etc
【Quick Start】 ①Assisted Matrix Automatic Leveling: Automatically detect 25 points, supports real-time adjustment, Real-time compensation of nozzle height ②Modular design with quick assembly lets you start printing straight away
ANYCUBIC MEGA ZERO FDM 3D Printer with Printing Size 220 x 220 x 250mm Y-axis Dual Screw Rod Powerful Extruder Support PLA, TPU, WOOD, PETG
【Fast Assembly】 Large Build Volume: 210 x 210 x 205mm. Modular design with quick assembly lets you start printing straight away
【Stability】 Rigid metal frame can reduce the body shake during printing and improve the printing quality
【ANYCUBIC Ultrabase】 Excellent adhesion, easy removal and durable. Ultrabase covered by microporous coating, shows strong adhesion in printing, super flatness, fast and uniform heating
ANYCUBIC MEGA-S 3D Printer Printing Size 210 x 210 x 205mm With UltraBase Heated Build Plate UK Plug, 3.5″ Touch Screen, Works with TPU/PLA/ABS
【Quick Start】 Printing Size: 210 x 210 x 205mm; Modular design with quick assembly lets you start printing straight away; Rigid metal frame can reduce the body shake during printing and improve the printing quality
【High Quality Extruder】 Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print Materials: TPU, PLA, ABS, HIPS, WOOD etc
【Suspended Filament Rack】 One-piece hanging design, simple and beautiful, the feeding of filament is smoother and the storage of filament is more convenient
ANYCUBIC Predator Delta Kossel 3D Printer Pre-assembled with Ultrabase hotbed and Assisted Leveling Large Print Size 370×370×455mm UK Plug + Free 1kg Filament, Works with PLA, TPU, ABS, HIPS, Wood
【Huge Build Volume and Stability】 Prints to a max size of φ370mm(D) x 455mm(H) giving you the freedom to think and print big. Rigid metal frame can reduce the body shake during printing and improve the printing quality
【Quick Start】 ①Assisted Matrix Automatic Leveling: Automatically detect 37 points, supports real-time adjustment, Real-time compensation of nozzle height ②Modular design with quick assembly lets you start printing straight away
【A Novel 3D Printer Platform – ANYCUBIC Ultrabase】 Excellent adhesion, easy removal and durable. Ultrabase covered by microporous coating, shows strong adhesion in printing, super flatness, fast and uniform heating
BLtouch auto bed level sensor for creality ender 3 3D printer
for creality V1 mainboard
for Ender-3 / Ender-3s / Ender-3 Pro/CR-10 3D Printer
full kit includes all brackets and cables
Canon PIXMA MG 5750 All-in-One Wi-Fi Printer
Easily connect, print, scan and copy at home using this affordable, high quality 5-ink All-In-One
Quickly and effortlessly print and scan from smart devices with the Canon PRINT app and Wi-Fi Direct
Experience the creative freedom of cloud printing and scanning with enhanced PIXMA Cloud Link
Canon SELPHY CP1000 Photo Printer, White
Stylish, ultra-compact photo printer for instant prints anywhere
Enjoy great flexibility with direct printing from cameras, memory cards or USB sticks
See the quality of dye sublimation for vibrant, durable lab-quality photos in less than one minute
Comgrow Creality 3D Ender-3 Pro 3D-Drucker mit Magnetischem Heißem Bettaufkleber & UL-zertifiziertes Netzteil
Upgrade Version: This is the upgrade version of Reality Ender-3 3D printer with Resume Printing, 220*220*250mm printing size
C-magnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling
Safe Power Supply: Ender 3 Pro comes with a Mean Well UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes
CREALITY 3D CR-10S Pro 3D printer by Technology Outlet
auto bed levelling
power off resume
low filament detect
Creality 3D Ender 5 3D Printer with Resume Printing Function and Brand Power Supply
High-Precision Printing Quality: Equipped with dual Y axis motors and down-shift Z axis, moving more smoothly, fewer points of failure and fewer headaches.
Brand Power Supply: Built-in brand power supply, heat up the hot bed to 110℃ in 5 minutes.
Resume Printing Function: The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
