3D Printers

£12.99£16.99

30m x 48mm Blue Tape Printing Masking Heat Bed Tape for 3D Printer Accessories (10 Pcs)

0 out of 5
(0)
SKU: N/A

Masking tape is based on the import colorful masked paper.
One single face made of coating rubber pressure sensitive adhesive.
The other face made of anti-stick material.

Select optionsCompare
£195.99

3D Printer Desktop by WEEDO M2 Metal Frame Structure Fully Enclosed and Assembled Single Extruder with Air Filtration Quiet and Healthy

0 out of 5
(0)
SKU: N/A

【Fully Enclosed】The enclosed design allows the printing process low noise and odour. Great for working next to your desktop 3d printer. Three point adjustments make the leveling process easy and quick even for a beginner
【Air Filtration】Our 3D printer equipped with air filtration module, Filtration fineness up to 0.08um, reduce the harmful gas in the 3d printing process
【Removable Print Bed】WEEDO M2 3d printer with magnetic print bed – So it will be very easy to remove the model or change the masking tape on print surface

Add to cartCompare
£24.79

3D Printer Kits CNC Shield V3.0 + R3 Board + Nema 17 Stepper Motor + 4PCS A4988 Driver + Stepper Motor Controller Shield Kit with Heat Sink for Quimat Arduino

0 out of 5
(0)
SKU: N/A

3D PRINTER KITS : This 3d printer kits will meet meet most requirements,it includes CNC shielded V3.0, UNO R3 board, Nema 17 stepper motor, A4988 Driver and Heat sink
A4988 DRIVER : Use a detachable A4988 compatible stepper drive with jumpers to set the microstepping for the stepper drive
STEPPER MOTOR : Suitable for Nema 17, enable to maintain 26Ncm (36.8oz.in) torque, 12V / 0.4A and 1.8 degree angle (200 steps / rev)

Add to cartCompare
£199.00

ADIMLab 3D Printer Gantry-S Prusa i3 type 32bit Board 24V15A Power 230X230X260 Build Size Power Resume Filament Detector Metal Extruder and 3 Fans for E3D V6 type Hot End

0 out of 5
(0)
SKU: N/A

ADIMLab_Gantry-S 3d printer includes: ◆240X240mm hot bed ◆High Adhesion Building Platform ◆32bit main board ◆Filament detector ◆Metal MK8 extruder ◆scraper, tweezers, Plugging needle, screwdrivers and other tools for assembling ◆4G SD card ◆12864 LCD Display ◆All V-Slot Rails ◆Filament holder
Partially Preassembled kits, 30-50 minutes finish assembly, supply videos for every steps on youtubeall All V-Slot Rails and 2040 frame make moving stable and the structure stronger
32bit Mother board with MOS module, Main frequency 72MHZ, Fast running speed, Equipped with: SD card upgrade configuration firmware, configuration file to adjust drive current, Support power Resume, filament detector; Upgrading and Optional : WIFI, Auto leveling

Add to cartCompare
£169.99

Anet A6 3D Printer DIY Kit Set with High Precision Self Assembly Big Size Heatbed, 2004 LCD Screen Display, TF Card Off-line Printing Function (220 x 220 x 250mm)

0 out of 5
(0)
SKU: N/A

【Technical Details】:Max Printer Size: 220 * 220 * 250mm, Printer Speed: 10-150mm/s, Nozzle Diameter: 0.4mm, Layer Thickness: 0.1-0.3mm, Printing Accuracy: 0.10mm, XY Axis Accuracy: 0.012mm, Z Axis Accuracy: 0.004mm, Nozzle Temperature: Max 260℃, Hot Bed Temperature: 50-100℃, Recommend ABS Setting: Nozzle: 230℃, Hotbed: 80℃, Recommend PLA Setting: Nozzle: 210 ℃ Hotbed: 50℃.
【STABILITY & RELIABILITY】 Acrylic plate fuselage: Laser percision cutting, good insulation and the frame structure is stable. High quality stepper motor: The motor is upgraded from single head to double head, the transmission is more stable and more synchronous.
【HD LED display:】 2004 LCD display, Insert SD card on sides, offline print; TF card support, LCD screen and keyboard for easy offline use

Add to cartCompare
£239.97£399.99

Anet A8 High Precision Desktop 3D Printer Kits Support ABS/PLA/HIP/PP/Wood Filament 1.75mm

0 out of 5
(0)
SKU: N/A

2004 LCD screen, English interface, 5 keys for easy operation, support SD card and off-line printing.
Customized MK8 nozzle with sophisticated technology to produce smooth filaments fluently.
Updated sophisticated V2.0 version mainboard, supporting multi-function, higher accuracy. Superior power supply system for safely using, 240W, 110V/220V.

Select optionsCompare
£25.99

ANYCUBIC 3D Printer I3 MEGA Upgrade Components

0 out of 5
(0)
SKU: N/A

PLEASE NOTE!! ONLY SUITABLE for ANYCUBIC I3 MEGA
Package Includes: 1pcs High Quality Extrude; 1pcs Suspended Filament Rack
High Quality Extrude: support print materials: TPU, PLA, ABS, HIPS, WOOD, provides better printing experience of flexible filament

Add to cartCompare

ANYCUBIC 3D Printer Photon UV Photocuring Ultra Precision 2560×1440 2K HD Masking LCD Printer with Smart Touch Color Screen Off-line Print and UK Plug (Basic Accessories)

0 out of 5
(0)
SKU: N/A

【Super Easy to Use and Set Up】 Unlike some DIY 3D printers, this Anycubic Photon is almost ready to work out of box. We have adequate instructions for set up, leveling and cleaning, etc. It also comes with all you need accessories and tools, includes resin to help you get started hassle-free
【Extreme Precision and Detail】 Using a 2560×1440 2K HD masking LCD, the Anycubic Photon has XY resolution of 47 microns and Z layer height down to 10 microns, means that it can deliver 3D printed models with amazing detail. The layers are so fine they can’t be noticed by the naked eye, which could not be imagined by traditional FDM 3D printers
【Standalone Metal Body, High Quality CNC Parts】 The compact standalone full metal body brings super rigidity. Metal and CNC-made structure offers repeatable and consistent performance in long run. The Anycubic Photon sets the entry level LCD 3D printer with extreme precision and quality

Select optionsCompare
£439.99

ANYCUBIC 3D Printer, Photon S UV LCD Printer Photocuring Ultra Precision, Masking Technology 2K Screen Matrix 405nm UV Light Z-axis Dual Linear Rail Printing with Air Filtering System

0 out of 5
(0)
SKU: N/A

【Slicing Software】 Photon S Slicing Software. Gives you extraordinary user experience. Photon S Slicing Software takes only 1 minute to slice 30Mb .stl model files while the open-sourced slicing software would take up to 10minutes
【Ultra Precision Technology】 Build volume: 115mm(L) X 65mm(W) X 165mm(H). Adopt matrix UV lighting and 2560*1440 high resolution screen, uniform distribution of energy, both contribute to enhance prototype precision, Z axis accuracy: 0.00125mm
【Z-axis Dual Linear Rail】 Improve the stability of Z axis, contribute to smooth surface and reconstruct more detail; New aluminum platform with wire drawing process design, enhance adhesion make it more stable during printing

Select optionsCompare
£318.49

ANYCUBIC 4Max Pro 3D Printer Printing Size 270x205x205mm³ with UltraBase Heated Build Plate UK Plug, Fully Assembled + Free 1kg Filament, Works with PLA/ABS

0 out of 5
(0)
SKU: N/A

【Quick Start】Printing Size: 270*205*205mm³, bigger volume for your creativity. Fully assembled, no hassle of installation
【High Quality Extruder】 Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print Materials: PLA, ABS, HIPS, WOOD etc
【Enclosed and Quiet Printing Space】 ①Maintain the environment under constant temperature, reduce the heat loss; ②Specific enclosed design, for children’s homeschooling; ③Quiet printing: barely hear the printing noise and no noise annoy on work and rest

Add to cartCompare
£469.99

ANYCUBIC Chiron 3D Printer Assisted Auto Leveling Single Extruder Large Print Size 400x400x450mm UK Plug + Free 1kg PLA Filament, Work with with PLA, TPU, ABS, HIPS, WOOD

0 out of 5
(0)
SKU: N/A

【Bigger Than Big】 Prints to a max size of 400x400x450mm giving you the freedom to think and print big. Rigid metal frame can reduce the body shake during printing and improve the printing quality
【More Filament Choices】 Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print Materials: TPU, PLA, ABS, HIPS, WOOD etc
【Quick Start】 ①Assisted Matrix Automatic Leveling: Automatically detect 25 points, supports real-time adjustment, Real-time compensation of nozzle height ②Modular design with quick assembly lets you start printing straight away

Add to cartCompare
£237.70

ANYCUBIC MEGA ZERO FDM 3D Printer with Printing Size 220 x 220 x 250mm Y-axis Dual Screw Rod Powerful Extruder Support PLA, TPU, WOOD, PETG

0 out of 5
(0)
SKU: N/A

【Fast Assembly】 Large Build Volume: 210 x 210 x 205mm. Modular design with quick assembly lets you start printing straight away
【Stability】 Rigid metal frame can reduce the body shake during printing and improve the printing quality
【ANYCUBIC Ultrabase】 Excellent adhesion, easy removal and durable. Ultrabase covered by microporous coating, shows strong adhesion in printing, super flatness, fast and uniform heating

Select optionsCompare
£349.99

ANYCUBIC MEGA-S 3D Printer Printing Size 210 x 210 x 205mm With UltraBase Heated Build Plate UK Plug, 3.5″ Touch Screen, Works with TPU/PLA/ABS

0 out of 5
(0)
SKU: N/A

【Quick Start】 Printing Size: 210 x 210 x 205mm; Modular design with quick assembly lets you start printing straight away; Rigid metal frame can reduce the body shake during printing and improve the printing quality
【High Quality Extruder】 Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print Materials: TPU, PLA, ABS, HIPS, WOOD etc
【Suspended Filament Rack】 One-piece hanging design, simple and beautiful, the feeding of filament is smoother and the storage of filament is more convenient

Add to cartCompare
£429.99

ANYCUBIC Predator Delta Kossel 3D Printer Pre-assembled with Ultrabase hotbed and Assisted Leveling Large Print Size 370×370×455mm UK Plug + Free 1kg Filament, Works with PLA, TPU, ABS, HIPS, Wood

0 out of 5
(0)
SKU: N/A

【Huge Build Volume and Stability】 Prints to a max size of φ370mm(D) x 455mm(H) giving you the freedom to think and print big. Rigid metal frame can reduce the body shake during printing and improve the printing quality
【Quick Start】 ①Assisted Matrix Automatic Leveling: Automatically detect 37 points, supports real-time adjustment, Real-time compensation of nozzle height ②Modular design with quick assembly lets you start printing straight away
【A Novel 3D Printer Platform – ANYCUBIC Ultrabase】 Excellent adhesion, easy removal and durable. Ultrabase covered by microporous coating, shows strong adhesion in printing, super flatness, fast and uniform heating

Add to cartCompare
£44.95

BLtouch auto bed level sensor for creality ender 3 3D printer

0 out of 5
(0)
SKU: N/A

for creality V1 mainboard
for Ender-3 / Ender-3s / Ender-3 Pro/CR-10 3D Printer
full kit includes all brackets and cables

Add to cartCompare
£279.00

Comgrow Creality 3D Ender-3 Pro 3D-Drucker mit Magnetischem Heißem Bettaufkleber & UL-zertifiziertes Netzteil

0 out of 5
(0)
SKU: N/A

Upgrade Version: This is the upgrade version of Reality Ender-3 3D printer with Resume Printing, 220*220*250mm printing size
C-magnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling
Safe Power Supply: Ender 3 Pro comes with a Mean Well UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes

Add to cartCompare
£426.45

CREALITY 3D CR-10S Pro 3D printer by Technology Outlet

0 out of 5
(0)
SKU: N/A

auto bed levelling
power off resume
low filament detect

Add to cartCompare
£299.00

Creality 3D Ender 5 3D Printer with Resume Printing Function and Brand Power Supply

0 out of 5
(0)
SKU: N/A

High-Precision Printing Quality: Equipped with dual Y axis motors and down-shift Z axis, moving more smoothly, fewer points of failure and fewer headaches.
Brand Power Supply: Built-in brand power supply, heat up the hot bed to 110℃ in 5 minutes.
Resume Printing Function: The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.

Add to cartCompare
£219.97

Creality 3D Ender-3 3D Printer DIY Easy-assemble 220 * 220 * 250mm Printing Size with Resume Printing Support PLA, ABS, TPU

0 out of 5
(0)
SKU: N/A

➤Easier to Assembly than Anet A8. Only need to 12 steps can complete installation the Creality 3D Ender-3 3D Printer. Save your install time, make more enjoy.
➤Upgrade MK-8 Extruder. Reduces plugging risk and bad extrustion. Make the printing process easier and reduce unnecessary trouble. Fast Heat Up. Hotbed can reach 110℃ in about 5 minutes to meet the needs of fast heating and printing.
➤Resume Printing. Safely protected power supply and resume printing function, if the machine is shut down or power failure accidentally, it can continue printing after power on.

Select optionsCompare
£23.98

Creality 3D Printer CR-10 Flexible Soft Magnetic Building Surface Plate Sticker of Heat Bed for CR 10S, CR-X

0 out of 5
(0)
SKU: N/A

Specially designed for CR 10 / 10S, CR-X with the hotbed plate size of 310*310mm.
This new magnetic plate sticker could be used repeatedly and more convenient to remove the model from it, for its separable structure.
The A plate is flexible and magnetic, it is easy to move away from the build platform and take away prints. The surface of A plate is able to resist high temperature to around 120 – 150 ℃ in short time.

Add to cartCompare

30m x 48mm Blue Tape Printing Masking Heat Bed Tape for 3D Printer Accessories (10 Pcs)

0 out of 5
(0)

Masking tape is based on the import colorful masked paper.
One single face made of coating rubber pressure sensitive adhesive.
The other face made of anti-stick material.

SKU: N/A
Availability:

Usually dispatched within 24 hours

£12.99£16.99 Select optionsCompare

3D Printer Desktop by WEEDO M2 Metal Frame Structure Fully Enclosed and Assembled Single Extruder with Air Filtration Quiet and Healthy

0 out of 5
(0)

【Fully Enclosed】The enclosed design allows the printing process low noise and odour. Great for working next to your desktop 3d printer. Three point adjustments make the leveling process easy and quick even for a beginner
【Air Filtration】Our 3D printer equipped with air filtration module, Filtration fineness up to 0.08um, reduce the harmful gas in the 3d printing process
【Removable Print Bed】WEEDO M2 3d printer with magnetic print bed – So it will be very easy to remove the model or change the masking tape on print surface

SKU: N/A
Availability:

Usually dispatched within 24 hours

£195.99 Add to cartCompare

3D Printer Kits CNC Shield V3.0 + R3 Board + Nema 17 Stepper Motor + 4PCS A4988 Driver + Stepper Motor Controller Shield Kit with Heat Sink for Quimat Arduino

0 out of 5
(0)

3D PRINTER KITS : This 3d printer kits will meet meet most requirements,it includes CNC shielded V3.0, UNO R3 board, Nema 17 stepper motor, A4988 Driver and Heat sink
A4988 DRIVER : Use a detachable A4988 compatible stepper drive with jumpers to set the microstepping for the stepper drive
STEPPER MOTOR : Suitable for Nema 17, enable to maintain 26Ncm (36.8oz.in) torque, 12V / 0.4A and 1.8 degree angle (200 steps / rev)

SKU: N/A
Availability:

Usually dispatched within 24 hours

£24.79 Add to cartCompare

ADIMLab 3D Printer Gantry-S Prusa i3 type 32bit Board 24V15A Power 230X230X260 Build Size Power Resume Filament Detector Metal Extruder and 3 Fans for E3D V6 type Hot End

0 out of 5
(0)

ADIMLab_Gantry-S 3d printer includes: ◆240X240mm hot bed ◆High Adhesion Building Platform ◆32bit main board ◆Filament detector ◆Metal MK8 extruder ◆scraper, tweezers, Plugging needle, screwdrivers and other tools for assembling ◆4G SD card ◆12864 LCD Display ◆All V-Slot Rails ◆Filament holder
Partially Preassembled kits, 30-50 minutes finish assembly, supply videos for every steps on youtubeall All V-Slot Rails and 2040 frame make moving stable and the structure stronger
32bit Mother board with MOS module, Main frequency 72MHZ, Fast running speed, Equipped with: SD card upgrade configuration firmware, configuration file to adjust drive current, Support power Resume, filament detector; Upgrading and Optional : WIFI, Auto leveling

SKU: N/A
Availability:

Usually dispatched within 24 hours

£199.00 Add to cartCompare

Anet A6 3D Printer DIY Kit Set with High Precision Self Assembly Big Size Heatbed, 2004 LCD Screen Display, TF Card Off-line Printing Function (220 x 220 x 250mm)

0 out of 5
(0)

【Technical Details】:Max Printer Size: 220 * 220 * 250mm, Printer Speed: 10-150mm/s, Nozzle Diameter: 0.4mm, Layer Thickness: 0.1-0.3mm, Printing Accuracy: 0.10mm, XY Axis Accuracy: 0.012mm, Z Axis Accuracy: 0.004mm, Nozzle Temperature: Max 260℃, Hot Bed Temperature: 50-100℃, Recommend ABS Setting: Nozzle: 230℃, Hotbed: 80℃, Recommend PLA Setting: Nozzle: 210 ℃ Hotbed: 50℃.
【STABILITY & RELIABILITY】 Acrylic plate fuselage: Laser percision cutting, good insulation and the frame structure is stable. High quality stepper motor: The motor is upgraded from single head to double head, the transmission is more stable and more synchronous.
【HD LED display:】 2004 LCD display, Insert SD card on sides, offline print; TF card support, LCD screen and keyboard for easy offline use

SKU: N/A
Availability:

Usually dispatched within 24 hours

£169.99 Add to cartCompare

Anet A8 High Precision Desktop 3D Printer Kits Support ABS/PLA/HIP/PP/Wood Filament 1.75mm

0 out of 5
(0)

2004 LCD screen, English interface, 5 keys for easy operation, support SD card and off-line printing.
Customized MK8 nozzle with sophisticated technology to produce smooth filaments fluently.
Updated sophisticated V2.0 version mainboard, supporting multi-function, higher accuracy. Superior power supply system for safely using, 240W, 110V/220V.

SKU: N/A
Availability:

Usually dispatched within 1-2 business days

£239.97£399.99 Select optionsCompare

ANYCUBIC 3D Printer I3 MEGA Upgrade Components

0 out of 5
(0)

PLEASE NOTE!! ONLY SUITABLE for ANYCUBIC I3 MEGA
Package Includes: 1pcs High Quality Extrude; 1pcs Suspended Filament Rack
High Quality Extrude: support print materials: TPU, PLA, ABS, HIPS, WOOD, provides better printing experience of flexible filament

SKU: N/A
Availability:

Usually dispatched within 24 hours

£25.99 Add to cartCompare

ANYCUBIC 3D Printer Photon UV Photocuring Ultra Precision 2560×1440 2K HD Masking LCD Printer with Smart Touch Color Screen Off-line Print and UK Plug (Basic Accessories)

0 out of 5
(0)

【Super Easy to Use and Set Up】 Unlike some DIY 3D printers, this Anycubic Photon is almost ready to work out of box. We have adequate instructions for set up, leveling and cleaning, etc. It also comes with all you need accessories and tools, includes resin to help you get started hassle-free
【Extreme Precision and Detail】 Using a 2560×1440 2K HD masking LCD, the Anycubic Photon has XY resolution of 47 microns and Z layer height down to 10 microns, means that it can deliver 3D printed models with amazing detail. The layers are so fine they can’t be noticed by the naked eye, which could not be imagined by traditional FDM 3D printers
【Standalone Metal Body, High Quality CNC Parts】 The compact standalone full metal body brings super rigidity. Metal and CNC-made structure offers repeatable and consistent performance in long run. The Anycubic Photon sets the entry level LCD 3D printer with extreme precision and quality

SKU: N/A

ANYCUBIC 3D Printer, Photon S UV LCD Printer Photocuring Ultra Precision, Masking Technology 2K Screen Matrix 405nm UV Light Z-axis Dual Linear Rail Printing with Air Filtering System

0 out of 5
(0)

【Slicing Software】 Photon S Slicing Software. Gives you extraordinary user experience. Photon S Slicing Software takes only 1 minute to slice 30Mb .stl model files while the open-sourced slicing software would take up to 10minutes
【Ultra Precision Technology】 Build volume: 115mm(L) X 65mm(W) X 165mm(H). Adopt matrix UV lighting and 2560*1440 high resolution screen, uniform distribution of energy, both contribute to enhance prototype precision, Z axis accuracy: 0.00125mm
【Z-axis Dual Linear Rail】 Improve the stability of Z axis, contribute to smooth surface and reconstruct more detail; New aluminum platform with wire drawing process design, enhance adhesion make it more stable during printing

SKU: N/A
Availability:

Usually dispatched within 24 hours

£439.99 Select optionsCompare

ANYCUBIC 4Max Pro 3D Printer Printing Size 270x205x205mm³ with UltraBase Heated Build Plate UK Plug, Fully Assembled + Free 1kg Filament, Works with PLA/ABS

0 out of 5
(0)

【Quick Start】Printing Size: 270*205*205mm³, bigger volume for your creativity. Fully assembled, no hassle of installation
【High Quality Extruder】 Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print Materials: PLA, ABS, HIPS, WOOD etc
【Enclosed and Quiet Printing Space】 ①Maintain the environment under constant temperature, reduce the heat loss; ②Specific enclosed design, for children’s homeschooling; ③Quiet printing: barely hear the printing noise and no noise annoy on work and rest

SKU: N/A
Availability:

Usually dispatched within 24 hours

£318.49 Add to cartCompare

ANYCUBIC Chiron 3D Printer Assisted Auto Leveling Single Extruder Large Print Size 400x400x450mm UK Plug + Free 1kg PLA Filament, Work with with PLA, TPU, ABS, HIPS, WOOD

0 out of 5
(0)

【Bigger Than Big】 Prints to a max size of 400x400x450mm giving you the freedom to think and print big. Rigid metal frame can reduce the body shake during printing and improve the printing quality
【More Filament Choices】 Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print Materials: TPU, PLA, ABS, HIPS, WOOD etc
【Quick Start】 ①Assisted Matrix Automatic Leveling: Automatically detect 25 points, supports real-time adjustment, Real-time compensation of nozzle height ②Modular design with quick assembly lets you start printing straight away

SKU: N/A
Availability:

Usually dispatched within 24 hours

£469.99 Add to cartCompare

ANYCUBIC MEGA ZERO FDM 3D Printer with Printing Size 220 x 220 x 250mm Y-axis Dual Screw Rod Powerful Extruder Support PLA, TPU, WOOD, PETG

0 out of 5
(0)

【Fast Assembly】 Large Build Volume: 210 x 210 x 205mm. Modular design with quick assembly lets you start printing straight away
【Stability】 Rigid metal frame can reduce the body shake during printing and improve the printing quality
【ANYCUBIC Ultrabase】 Excellent adhesion, easy removal and durable. Ultrabase covered by microporous coating, shows strong adhesion in printing, super flatness, fast and uniform heating

SKU: N/A
Availability:

Usually dispatched within 24 hours

£237.70 Select optionsCompare

ANYCUBIC MEGA-S 3D Printer Printing Size 210 x 210 x 205mm With UltraBase Heated Build Plate UK Plug, 3.5″ Touch Screen, Works with TPU/PLA/ABS

0 out of 5
(0)

【Quick Start】 Printing Size: 210 x 210 x 205mm; Modular design with quick assembly lets you start printing straight away; Rigid metal frame can reduce the body shake during printing and improve the printing quality
【High Quality Extruder】 Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print Materials: TPU, PLA, ABS, HIPS, WOOD etc
【Suspended Filament Rack】 One-piece hanging design, simple and beautiful, the feeding of filament is smoother and the storage of filament is more convenient

SKU: N/A
Availability:

Usually dispatched within 24 hours

£349.99 Add to cartCompare

ANYCUBIC Predator Delta Kossel 3D Printer Pre-assembled with Ultrabase hotbed and Assisted Leveling Large Print Size 370×370×455mm UK Plug + Free 1kg Filament, Works with PLA, TPU, ABS, HIPS, Wood

0 out of 5
(0)

【Huge Build Volume and Stability】 Prints to a max size of φ370mm(D) x 455mm(H) giving you the freedom to think and print big. Rigid metal frame can reduce the body shake during printing and improve the printing quality
【Quick Start】 ①Assisted Matrix Automatic Leveling: Automatically detect 37 points, supports real-time adjustment, Real-time compensation of nozzle height ②Modular design with quick assembly lets you start printing straight away
【A Novel 3D Printer Platform – ANYCUBIC Ultrabase】 Excellent adhesion, easy removal and durable. Ultrabase covered by microporous coating, shows strong adhesion in printing, super flatness, fast and uniform heating

SKU: N/A
Availability:

Usually dispatched within 24 hours

£429.99 Add to cartCompare

BLtouch auto bed level sensor for creality ender 3 3D printer

0 out of 5
(0)

for creality V1 mainboard
for Ender-3 / Ender-3s / Ender-3 Pro/CR-10 3D Printer
full kit includes all brackets and cables

SKU: N/A

Comgrow Creality 3D Ender-3 Pro 3D-Drucker mit Magnetischem Heißem Bettaufkleber & UL-zertifiziertes Netzteil

0 out of 5
(0)

Upgrade Version: This is the upgrade version of Reality Ender-3 3D printer with Resume Printing, 220*220*250mm printing size
C-magnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling
Safe Power Supply: Ender 3 Pro comes with a Mean Well UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes

SKU: N/A
Availability:

Usually dispatched within 24 hours

£279.00 Add to cartCompare
Availability:

Usually dispatched within 24 hours

£426.45 Add to cartCompare

Creality 3D Ender 5 3D Printer with Resume Printing Function and Brand Power Supply

0 out of 5
(0)

High-Precision Printing Quality: Equipped with dual Y axis motors and down-shift Z axis, moving more smoothly, fewer points of failure and fewer headaches.
Brand Power Supply: Built-in brand power supply, heat up the hot bed to 110℃ in 5 minutes.
Resume Printing Function: The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.

SKU: N/A
Availability:

Usually dispatched within 24 hours

£299.00 Add to cartCompare

Creality 3D Ender-3 3D Printer DIY Easy-assemble 220 * 220 * 250mm Printing Size with Resume Printing Support PLA, ABS, TPU

0 out of 5
(0)

➤Easier to Assembly than Anet A8. Only need to 12 steps can complete installation the Creality 3D Ender-3 3D Printer. Save your install time, make more enjoy.
➤Upgrade MK-8 Extruder. Reduces plugging risk and bad extrustion. Make the printing process easier and reduce unnecessary trouble. Fast Heat Up. Hotbed can reach 110℃ in about 5 minutes to meet the needs of fast heating and printing.
➤Resume Printing. Safely protected power supply and resume printing function, if the machine is shut down or power failure accidentally, it can continue printing after power on.

SKU: N/A
Availability:

Usually dispatched within 1-2 business days

£219.97 Select optionsCompare

Creality 3D Printer CR-10 Flexible Soft Magnetic Building Surface Plate Sticker of Heat Bed for CR 10S, CR-X

0 out of 5
(0)

Specially designed for CR 10 / 10S, CR-X with the hotbed plate size of 310*310mm.
This new magnetic plate sticker could be used repeatedly and more convenient to remove the model from it, for its separable structure.
The A plate is flexible and magnetic, it is easy to move away from the build platform and take away prints. The surface of A plate is able to resist high temperature to around 120 – 150 ℃ in short time.

SKU: N/A
Availability:

Usually dispatched within 24 hours

£23.98 Add to cartCompare

30m x 48mm Blue Tape Printing Masking Heat Bed Tape for 3D Printer Accessories (10 Pcs)

0 out of 5
(0)

Masking tape is based on the import colorful masked paper.
One single face made of coating rubber pressure sensitive adhesive.
The other face made of anti-stick material.

Availability:

Usually dispatched within 24 hours

£12.99£16.99 Select optionsCompare

3D Printer Desktop by WEEDO M2 Metal Frame Structure Fully Enclosed and Assembled Single Extruder with Air Filtration Quiet and Healthy

0 out of 5
(0)

【Fully Enclosed】The enclosed design allows the printing process low noise and odour. Great for working next to your desktop 3d printer. Three point adjustments make the leveling process easy and quick even for a beginner
【Air Filtration】Our 3D printer equipped with air filtration module, Filtration fineness up to 0.08um, reduce the harmful gas in the 3d printing process
【Removable Print Bed】WEEDO M2 3d printer with magnetic print bed – So it will be very easy to remove the model or change the masking tape on print surface

Availability:

Usually dispatched within 24 hours

£195.99 Add to cartCompare

3D Printer Kits CNC Shield V3.0 + R3 Board + Nema 17 Stepper Motor + 4PCS A4988 Driver + Stepper Motor Controller Shield Kit with Heat Sink for Quimat Arduino

0 out of 5
(0)

3D PRINTER KITS : This 3d printer kits will meet meet most requirements,it includes CNC shielded V3.0, UNO R3 board, Nema 17 stepper motor, A4988 Driver and Heat sink
A4988 DRIVER : Use a detachable A4988 compatible stepper drive with jumpers to set the microstepping for the stepper drive
STEPPER MOTOR : Suitable for Nema 17, enable to maintain 26Ncm (36.8oz.in) torque, 12V / 0.4A and 1.8 degree angle (200 steps / rev)

Availability:

Usually dispatched within 24 hours

£24.79 Add to cartCompare

ADIMLab 3D Printer Gantry-S Prusa i3 type 32bit Board 24V15A Power 230X230X260 Build Size Power Resume Filament Detector Metal Extruder and 3 Fans for E3D V6 type Hot End

0 out of 5
(0)

ADIMLab_Gantry-S 3d printer includes: ◆240X240mm hot bed ◆High Adhesion Building Platform ◆32bit main board ◆Filament detector ◆Metal MK8 extruder ◆scraper, tweezers, Plugging needle, screwdrivers and other tools for assembling ◆4G SD card ◆12864 LCD Display ◆All V-Slot Rails ◆Filament holder
Partially Preassembled kits, 30-50 minutes finish assembly, supply videos for every steps on youtubeall All V-Slot Rails and 2040 frame make moving stable and the structure stronger
32bit Mother board with MOS module, Main frequency 72MHZ, Fast running speed, Equipped with: SD card upgrade configuration firmware, configuration file to adjust drive current, Support power Resume, filament detector; Upgrading and Optional : WIFI, Auto leveling

Availability:

Usually dispatched within 24 hours

£199.00 Add to cartCompare

Anet A6 3D Printer DIY Kit Set with High Precision Self Assembly Big Size Heatbed, 2004 LCD Screen Display, TF Card Off-line Printing Function (220 x 220 x 250mm)

0 out of 5
(0)

【Technical Details】:Max Printer Size: 220 * 220 * 250mm, Printer Speed: 10-150mm/s, Nozzle Diameter: 0.4mm, Layer Thickness: 0.1-0.3mm, Printing Accuracy: 0.10mm, XY Axis Accuracy: 0.012mm, Z Axis Accuracy: 0.004mm, Nozzle Temperature: Max 260℃, Hot Bed Temperature: 50-100℃, Recommend ABS Setting: Nozzle: 230℃, Hotbed: 80℃, Recommend PLA Setting: Nozzle: 210 ℃ Hotbed: 50℃.
【STABILITY & RELIABILITY】 Acrylic plate fuselage: Laser percision cutting, good insulation and the frame structure is stable. High quality stepper motor: The motor is upgraded from single head to double head, the transmission is more stable and more synchronous.
【HD LED display:】 2004 LCD display, Insert SD card on sides, offline print; TF card support, LCD screen and keyboard for easy offline use

Availability:

Usually dispatched within 24 hours

£169.99 Add to cartCompare

Anet A8 High Precision Desktop 3D Printer Kits Support ABS/PLA/HIP/PP/Wood Filament 1.75mm

0 out of 5
(0)

2004 LCD screen, English interface, 5 keys for easy operation, support SD card and off-line printing.
Customized MK8 nozzle with sophisticated technology to produce smooth filaments fluently.
Updated sophisticated V2.0 version mainboard, supporting multi-function, higher accuracy. Superior power supply system for safely using, 240W, 110V/220V.

Availability:

Usually dispatched within 1-2 business days

£239.97£399.99 Select optionsCompare

ANYCUBIC 3D Printer I3 MEGA Upgrade Components

0 out of 5
(0)

PLEASE NOTE!! ONLY SUITABLE for ANYCUBIC I3 MEGA
Package Includes: 1pcs High Quality Extrude; 1pcs Suspended Filament Rack
High Quality Extrude: support print materials: TPU, PLA, ABS, HIPS, WOOD, provides better printing experience of flexible filament

Availability:

Usually dispatched within 24 hours

£25.99 Add to cartCompare

ANYCUBIC 3D Printer Photon UV Photocuring Ultra Precision 2560×1440 2K HD Masking LCD Printer with Smart Touch Color Screen Off-line Print and UK Plug (Basic Accessories)

0 out of 5
(0)

【Super Easy to Use and Set Up】 Unlike some DIY 3D printers, this Anycubic Photon is almost ready to work out of box. We have adequate instructions for set up, leveling and cleaning, etc. It also comes with all you need accessories and tools, includes resin to help you get started hassle-free
【Extreme Precision and Detail】 Using a 2560×1440 2K HD masking LCD, the Anycubic Photon has XY resolution of 47 microns and Z layer height down to 10 microns, means that it can deliver 3D printed models with amazing detail. The layers are so fine they can’t be noticed by the naked eye, which could not be imagined by traditional FDM 3D printers
【Standalone Metal Body, High Quality CNC Parts】 The compact standalone full metal body brings super rigidity. Metal and CNC-made structure offers repeatable and consistent performance in long run. The Anycubic Photon sets the entry level LCD 3D printer with extreme precision and quality

ANYCUBIC 3D Printer, Photon S UV LCD Printer Photocuring Ultra Precision, Masking Technology 2K Screen Matrix 405nm UV Light Z-axis Dual Linear Rail Printing with Air Filtering System

0 out of 5
(0)

【Slicing Software】 Photon S Slicing Software. Gives you extraordinary user experience. Photon S Slicing Software takes only 1 minute to slice 30Mb .stl model files while the open-sourced slicing software would take up to 10minutes
【Ultra Precision Technology】 Build volume: 115mm(L) X 65mm(W) X 165mm(H). Adopt matrix UV lighting and 2560*1440 high resolution screen, uniform distribution of energy, both contribute to enhance prototype precision, Z axis accuracy: 0.00125mm
【Z-axis Dual Linear Rail】 Improve the stability of Z axis, contribute to smooth surface and reconstruct more detail; New aluminum platform with wire drawing process design, enhance adhesion make it more stable during printing

Availability:

Usually dispatched within 24 hours

£439.99 Select optionsCompare

ANYCUBIC 4Max Pro 3D Printer Printing Size 270x205x205mm³ with UltraBase Heated Build Plate UK Plug, Fully Assembled + Free 1kg Filament, Works with PLA/ABS

0 out of 5
(0)

【Quick Start】Printing Size: 270*205*205mm³, bigger volume for your creativity. Fully assembled, no hassle of installation
【High Quality Extruder】 Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print Materials: PLA, ABS, HIPS, WOOD etc
【Enclosed and Quiet Printing Space】 ①Maintain the environment under constant temperature, reduce the heat loss; ②Specific enclosed design, for children’s homeschooling; ③Quiet printing: barely hear the printing noise and no noise annoy on work and rest

Availability:

Usually dispatched within 24 hours

£318.49 Add to cartCompare

ANYCUBIC Chiron 3D Printer Assisted Auto Leveling Single Extruder Large Print Size 400x400x450mm UK Plug + Free 1kg PLA Filament, Work with with PLA, TPU, ABS, HIPS, WOOD

0 out of 5
(0)

【Bigger Than Big】 Prints to a max size of 400x400x450mm giving you the freedom to think and print big. Rigid metal frame can reduce the body shake during printing and improve the printing quality
【More Filament Choices】 Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print Materials: TPU, PLA, ABS, HIPS, WOOD etc
【Quick Start】 ①Assisted Matrix Automatic Leveling: Automatically detect 25 points, supports real-time adjustment, Real-time compensation of nozzle height ②Modular design with quick assembly lets you start printing straight away

Availability:

Usually dispatched within 24 hours

£469.99 Add to cartCompare

ANYCUBIC MEGA ZERO FDM 3D Printer with Printing Size 220 x 220 x 250mm Y-axis Dual Screw Rod Powerful Extruder Support PLA, TPU, WOOD, PETG

0 out of 5
(0)

【Fast Assembly】 Large Build Volume: 210 x 210 x 205mm. Modular design with quick assembly lets you start printing straight away
【Stability】 Rigid metal frame can reduce the body shake during printing and improve the printing quality
【ANYCUBIC Ultrabase】 Excellent adhesion, easy removal and durable. Ultrabase covered by microporous coating, shows strong adhesion in printing, super flatness, fast and uniform heating

Availability:

Usually dispatched within 24 hours

£237.70 Select optionsCompare

ANYCUBIC MEGA-S 3D Printer Printing Size 210 x 210 x 205mm With UltraBase Heated Build Plate UK Plug, 3.5″ Touch Screen, Works with TPU/PLA/ABS

0 out of 5
(0)

【Quick Start】 Printing Size: 210 x 210 x 205mm; Modular design with quick assembly lets you start printing straight away; Rigid metal frame can reduce the body shake during printing and improve the printing quality
【High Quality Extruder】 Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print Materials: TPU, PLA, ABS, HIPS, WOOD etc
【Suspended Filament Rack】 One-piece hanging design, simple and beautiful, the feeding of filament is smoother and the storage of filament is more convenient

Availability:

Usually dispatched within 24 hours

£349.99 Add to cartCompare

ANYCUBIC Predator Delta Kossel 3D Printer Pre-assembled with Ultrabase hotbed and Assisted Leveling Large Print Size 370×370×455mm UK Plug + Free 1kg Filament, Works with PLA, TPU, ABS, HIPS, Wood

0 out of 5
(0)

【Huge Build Volume and Stability】 Prints to a max size of φ370mm(D) x 455mm(H) giving you the freedom to think and print big. Rigid metal frame can reduce the body shake during printing and improve the printing quality
【Quick Start】 ①Assisted Matrix Automatic Leveling: Automatically detect 37 points, supports real-time adjustment, Real-time compensation of nozzle height ②Modular design with quick assembly lets you start printing straight away
【A Novel 3D Printer Platform – ANYCUBIC Ultrabase】 Excellent adhesion, easy removal and durable. Ultrabase covered by microporous coating, shows strong adhesion in printing, super flatness, fast and uniform heating

Availability:

Usually dispatched within 24 hours

£429.99 Add to cartCompare

BLtouch auto bed level sensor for creality ender 3 3D printer

0 out of 5
(0)

for creality V1 mainboard
for Ender-3 / Ender-3s / Ender-3 Pro/CR-10 3D Printer
full kit includes all brackets and cables

Comgrow Creality 3D Ender-3 Pro 3D-Drucker mit Magnetischem Heißem Bettaufkleber & UL-zertifiziertes Netzteil

0 out of 5
(0)

Upgrade Version: This is the upgrade version of Reality Ender-3 3D printer with Resume Printing, 220*220*250mm printing size
C-magnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling
Safe Power Supply: Ender 3 Pro comes with a Mean Well UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes

Availability:

Usually dispatched within 24 hours

£279.00 Add to cartCompare
Availability:

Usually dispatched within 24 hours

£426.45 Add to cartCompare

Creality 3D Ender 5 3D Printer with Resume Printing Function and Brand Power Supply

0 out of 5
(0)

High-Precision Printing Quality: Equipped with dual Y axis motors and down-shift Z axis, moving more smoothly, fewer points of failure and fewer headaches.
Brand Power Supply: Built-in brand power supply, heat up the hot bed to 110℃ in 5 minutes.
Resume Printing Function: The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.

Availability:

Usually dispatched within 24 hours

£299.00 Add to cartCompare

Creality 3D Ender-3 3D Printer DIY Easy-assemble 220 * 220 * 250mm Printing Size with Resume Printing Support PLA, ABS, TPU

0 out of 5
(0)

➤Easier to Assembly than Anet A8. Only need to 12 steps can complete installation the Creality 3D Ender-3 3D Printer. Save your install time, make more enjoy.
➤Upgrade MK-8 Extruder. Reduces plugging risk and bad extrustion. Make the printing process easier and reduce unnecessary trouble. Fast Heat Up. Hotbed can reach 110℃ in about 5 minutes to meet the needs of fast heating and printing.
➤Resume Printing. Safely protected power supply and resume printing function, if the machine is shut down or power failure accidentally, it can continue printing after power on.

Availability:

Usually dispatched within 1-2 business days

£219.97 Select optionsCompare

Creality 3D Printer CR-10 Flexible Soft Magnetic Building Surface Plate Sticker of Heat Bed for CR 10S, CR-X

0 out of 5
(0)

Specially designed for CR 10 / 10S, CR-X with the hotbed plate size of 310*310mm.
This new magnetic plate sticker could be used repeatedly and more convenient to remove the model from it, for its separable structure.
The A plate is flexible and magnetic, it is easy to move away from the build platform and take away prints. The surface of A plate is able to resist high temperature to around 120 – 150 ℃ in short time.

Availability:

Usually dispatched within 24 hours

£23.98 Add to cartCompare

30m x 48mm Blue Tape Printing Masking Heat Bed Tape for 3D Printer Accessories (10 Pcs)

0 out of 5
(0)

Masking tape is based on the import colorful masked paper.
One single face made of coating rubber pressure sensitive adhesive.
The other face made of anti-stick material.

£12.99£16.99 Select optionsCompare

3D Printer Desktop by WEEDO M2 Metal Frame Structure Fully Enclosed and Assembled Single Extruder with Air Filtration Quiet and Healthy

0 out of 5
(0)

【Fully Enclosed】The enclosed design allows the printing process low noise and odour. Great for working next to your desktop 3d printer. Three point adjustments make the leveling process easy and quick even for a beginner
【Air Filtration】Our 3D printer equipped with air filtration module, Filtration fineness up to 0.08um, reduce the harmful gas in the 3d printing process
【Removable Print Bed】WEEDO M2 3d printer with magnetic print bed – So it will be very easy to remove the model or change the masking tape on print surface

3D Printer Kits CNC Shield V3.0 + R3 Board + Nema 17 Stepper Motor + 4PCS A4988 Driver + Stepper Motor Controller Shield Kit with Heat Sink for Quimat Arduino

0 out of 5
(0)

3D PRINTER KITS : This 3d printer kits will meet meet most requirements,it includes CNC shielded V3.0, UNO R3 board, Nema 17 stepper motor, A4988 Driver and Heat sink
A4988 DRIVER : Use a detachable A4988 compatible stepper drive with jumpers to set the microstepping for the stepper drive
STEPPER MOTOR : Suitable for Nema 17, enable to maintain 26Ncm (36.8oz.in) torque, 12V / 0.4A and 1.8 degree angle (200 steps / rev)

ADIMLab 3D Printer Gantry-S Prusa i3 type 32bit Board 24V15A Power 230X230X260 Build Size Power Resume Filament Detector Metal Extruder and 3 Fans for E3D V6 type Hot End

0 out of 5
(0)

ADIMLab_Gantry-S 3d printer includes: ◆240X240mm hot bed ◆High Adhesion Building Platform ◆32bit main board ◆Filament detector ◆Metal MK8 extruder ◆scraper, tweezers, Plugging needle, screwdrivers and other tools for assembling ◆4G SD card ◆12864 LCD Display ◆All V-Slot Rails ◆Filament holder
Partially Preassembled kits, 30-50 minutes finish assembly, supply videos for every steps on youtubeall All V-Slot Rails and 2040 frame make moving stable and the structure stronger
32bit Mother board with MOS module, Main frequency 72MHZ, Fast running speed, Equipped with: SD card upgrade configuration firmware, configuration file to adjust drive current, Support power Resume, filament detector; Upgrading and Optional : WIFI, Auto leveling

Anet A6 3D Printer DIY Kit Set with High Precision Self Assembly Big Size Heatbed, 2004 LCD Screen Display, TF Card Off-line Printing Function (220 x 220 x 250mm)

0 out of 5
(0)

【Technical Details】:Max Printer Size: 220 * 220 * 250mm, Printer Speed: 10-150mm/s, Nozzle Diameter: 0.4mm, Layer Thickness: 0.1-0.3mm, Printing Accuracy: 0.10mm, XY Axis Accuracy: 0.012mm, Z Axis Accuracy: 0.004mm, Nozzle Temperature: Max 260℃, Hot Bed Temperature: 50-100℃, Recommend ABS Setting: Nozzle: 230℃, Hotbed: 80℃, Recommend PLA Setting: Nozzle: 210 ℃ Hotbed: 50℃.
【STABILITY & RELIABILITY】 Acrylic plate fuselage: Laser percision cutting, good insulation and the frame structure is stable. High quality stepper motor: The motor is upgraded from single head to double head, the transmission is more stable and more synchronous.
【HD LED display:】 2004 LCD display, Insert SD card on sides, offline print; TF card support, LCD screen and keyboard for easy offline use

Anet A8 High Precision Desktop 3D Printer Kits Support ABS/PLA/HIP/PP/Wood Filament 1.75mm

0 out of 5
(0)

2004 LCD screen, English interface, 5 keys for easy operation, support SD card and off-line printing.
Customized MK8 nozzle with sophisticated technology to produce smooth filaments fluently.
Updated sophisticated V2.0 version mainboard, supporting multi-function, higher accuracy. Superior power supply system for safely using, 240W, 110V/220V.

£239.97£399.99 Select optionsCompare

ANYCUBIC 3D Printer I3 MEGA Upgrade Components

0 out of 5
(0)

PLEASE NOTE!! ONLY SUITABLE for ANYCUBIC I3 MEGA
Package Includes: 1pcs High Quality Extrude; 1pcs Suspended Filament Rack
High Quality Extrude: support print materials: TPU, PLA, ABS, HIPS, WOOD, provides better printing experience of flexible filament

ANYCUBIC 3D Printer Photon UV Photocuring Ultra Precision 2560×1440 2K HD Masking LCD Printer with Smart Touch Color Screen Off-line Print and UK Plug (Basic Accessories)

0 out of 5
(0)

【Super Easy to Use and Set Up】 Unlike some DIY 3D printers, this Anycubic Photon is almost ready to work out of box. We have adequate instructions for set up, leveling and cleaning, etc. It also comes with all you need accessories and tools, includes resin to help you get started hassle-free
【Extreme Precision and Detail】 Using a 2560×1440 2K HD masking LCD, the Anycubic Photon has XY resolution of 47 microns and Z layer height down to 10 microns, means that it can deliver 3D printed models with amazing detail. The layers are so fine they can’t be noticed by the naked eye, which could not be imagined by traditional FDM 3D printers
【Standalone Metal Body, High Quality CNC Parts】 The compact standalone full metal body brings super rigidity. Metal and CNC-made structure offers repeatable and consistent performance in long run. The Anycubic Photon sets the entry level LCD 3D printer with extreme precision and quality

ANYCUBIC 3D Printer, Photon S UV LCD Printer Photocuring Ultra Precision, Masking Technology 2K Screen Matrix 405nm UV Light Z-axis Dual Linear Rail Printing with Air Filtering System

0 out of 5
(0)

【Slicing Software】 Photon S Slicing Software. Gives you extraordinary user experience. Photon S Slicing Software takes only 1 minute to slice 30Mb .stl model files while the open-sourced slicing software would take up to 10minutes
【Ultra Precision Technology】 Build volume: 115mm(L) X 65mm(W) X 165mm(H). Adopt matrix UV lighting and 2560*1440 high resolution screen, uniform distribution of energy, both contribute to enhance prototype precision, Z axis accuracy: 0.00125mm
【Z-axis Dual Linear Rail】 Improve the stability of Z axis, contribute to smooth surface and reconstruct more detail; New aluminum platform with wire drawing process design, enhance adhesion make it more stable during printing

ANYCUBIC 4Max Pro 3D Printer Printing Size 270x205x205mm³ with UltraBase Heated Build Plate UK Plug, Fully Assembled + Free 1kg Filament, Works with PLA/ABS

0 out of 5
(0)

【Quick Start】Printing Size: 270*205*205mm³, bigger volume for your creativity. Fully assembled, no hassle of installation
【High Quality Extruder】 Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print Materials: PLA, ABS, HIPS, WOOD etc
【Enclosed and Quiet Printing Space】 ①Maintain the environment under constant temperature, reduce the heat loss; ②Specific enclosed design, for children’s homeschooling; ③Quiet printing: barely hear the printing noise and no noise annoy on work and rest

ANYCUBIC Chiron 3D Printer Assisted Auto Leveling Single Extruder Large Print Size 400x400x450mm UK Plug + Free 1kg PLA Filament, Work with with PLA, TPU, ABS, HIPS, WOOD

0 out of 5
(0)

【Bigger Than Big】 Prints to a max size of 400x400x450mm giving you the freedom to think and print big. Rigid metal frame can reduce the body shake during printing and improve the printing quality
【More Filament Choices】 Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print Materials: TPU, PLA, ABS, HIPS, WOOD etc
【Quick Start】 ①Assisted Matrix Automatic Leveling: Automatically detect 25 points, supports real-time adjustment, Real-time compensation of nozzle height ②Modular design with quick assembly lets you start printing straight away

ANYCUBIC MEGA ZERO FDM 3D Printer with Printing Size 220 x 220 x 250mm Y-axis Dual Screw Rod Powerful Extruder Support PLA, TPU, WOOD, PETG

0 out of 5
(0)

【Fast Assembly】 Large Build Volume: 210 x 210 x 205mm. Modular design with quick assembly lets you start printing straight away
【Stability】 Rigid metal frame can reduce the body shake during printing and improve the printing quality
【ANYCUBIC Ultrabase】 Excellent adhesion, easy removal and durable. Ultrabase covered by microporous coating, shows strong adhesion in printing, super flatness, fast and uniform heating

ANYCUBIC MEGA-S 3D Printer Printing Size 210 x 210 x 205mm With UltraBase Heated Build Plate UK Plug, 3.5″ Touch Screen, Works with TPU/PLA/ABS

0 out of 5
(0)

【Quick Start】 Printing Size: 210 x 210 x 205mm; Modular design with quick assembly lets you start printing straight away; Rigid metal frame can reduce the body shake during printing and improve the printing quality
【High Quality Extruder】 Offers precise extrusion for your 3D printing with its solid filament drive and overall mechanical design. Support Print Materials: TPU, PLA, ABS, HIPS, WOOD etc
【Suspended Filament Rack】 One-piece hanging design, simple and beautiful, the feeding of filament is smoother and the storage of filament is more convenient

ANYCUBIC Predator Delta Kossel 3D Printer Pre-assembled with Ultrabase hotbed and Assisted Leveling Large Print Size 370×370×455mm UK Plug + Free 1kg Filament, Works with PLA, TPU, ABS, HIPS, Wood

0 out of 5
(0)

【Huge Build Volume and Stability】 Prints to a max size of φ370mm(D) x 455mm(H) giving you the freedom to think and print big. Rigid metal frame can reduce the body shake during printing and improve the printing quality
【Quick Start】 ①Assisted Matrix Automatic Leveling: Automatically detect 37 points, supports real-time adjustment, Real-time compensation of nozzle height ②Modular design with quick assembly lets you start printing straight away
【A Novel 3D Printer Platform – ANYCUBIC Ultrabase】 Excellent adhesion, easy removal and durable. Ultrabase covered by microporous coating, shows strong adhesion in printing, super flatness, fast and uniform heating

BLtouch auto bed level sensor for creality ender 3 3D printer

0 out of 5
(0)

for creality V1 mainboard
for Ender-3 / Ender-3s / Ender-3 Pro/CR-10 3D Printer
full kit includes all brackets and cables

Comgrow Creality 3D Ender-3 Pro 3D-Drucker mit Magnetischem Heißem Bettaufkleber & UL-zertifiziertes Netzteil

0 out of 5
(0)

Upgrade Version: This is the upgrade version of Reality Ender-3 3D printer with Resume Printing, 220*220*250mm printing size
C-magnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling
Safe Power Supply: Ender 3 Pro comes with a Mean Well UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes

Creality 3D Ender 5 3D Printer with Resume Printing Function and Brand Power Supply

0 out of 5
(0)

High-Precision Printing Quality: Equipped with dual Y axis motors and down-shift Z axis, moving more smoothly, fewer points of failure and fewer headaches.
Brand Power Supply: Built-in brand power supply, heat up the hot bed to 110℃ in 5 minutes.
Resume Printing Function: The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.

Creality 3D Ender-3 3D Printer DIY Easy-assemble 220 * 220 * 250mm Printing Size with Resume Printing Support PLA, ABS, TPU

0 out of 5
(0)

➤Easier to Assembly than Anet A8. Only need to 12 steps can complete installation the Creality 3D Ender-3 3D Printer. Save your install time, make more enjoy.
➤Upgrade MK-8 Extruder. Reduces plugging risk and bad extrustion. Make the printing process easier and reduce unnecessary trouble. Fast Heat Up. Hotbed can reach 110℃ in about 5 minutes to meet the needs of fast heating and printing.
➤Resume Printing. Safely protected power supply and resume printing function, if the machine is shut down or power failure accidentally, it can continue printing after power on.

Creality 3D Printer CR-10 Flexible Soft Magnetic Building Surface Plate Sticker of Heat Bed for CR 10S, CR-X

0 out of 5
(0)

Specially designed for CR 10 / 10S, CR-X with the hotbed plate size of 310*310mm.
This new magnetic plate sticker could be used repeatedly and more convenient to remove the model from it, for its separable structure.
The A plate is flexible and magnetic, it is easy to move away from the build platform and take away prints. The surface of A plate is able to resist high temperature to around 120 – 150 ℃ in short time.

Showing 1–20 of 76 results

Cart Item Removed. Undo
  • No products in the cart.